
This series are 10/100M, Unmanaged PoE Switches,Plug-and-Play design, easy to install and operate. Can supply power to the connected PoE supported devices via CAT 5E and above twisted cables; By integrating the data transmitting and power supply, it eliminates the effort constructing your network; Support a maximum output power of 30W on every single PoE port and a maximum transmitting distance of 100m. Fixed Ports 8 x 10/100Mbps ports Standards and Protocol IEEE 802.3AF 60WIEEE802.3af/at Output power max 30W (single port) , Total Output Power 150W, PoE Pin-out 1/2(+),3/6(-); 4/5(+),7/8(-) for customization, Switching Capacity =1.6Gbps, Forward Mode Full wire-speed storage and forwarding, Forwarding Rate 10M, Operation Temperature -20~50°C, Storage Temperature -40~70°C, Operation Humidity 10%~90%(non-condensing), Storage Humidity 5%~95%(non-condensing), Dimensions (mm) 280 x 180 x 44, Input Power Supply AC, Weight < 1.5Kg, LED Indicator Power,Link/Act,PoE Status, Energy Saving Comply with EEE Energy Efficient Ethernet, Standards / Protocols IEEE 802.3af,Power Over Ethernet IEEE 802.3at,Power Over Ethernet Plus IEEE 802.3u,100BASE-TX IEEE 802.3x,Full-Duplex Flow Control IEEE 802.3az,EEE(Energy Efficient Ethernet), MAC Address Table UP to 8K MAC addresses Support auto-update, two-way learning, Port Flow Control Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode, Jumbo Frame Maximum support 9216Byte, Physic Medium 0/100MBase-TX, Network Cable Deployment Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable, Negotiation Pattern Support port auto-negotiation function( automatically negotiate transmission rate and Duplex modes
